Download Applehda Patcher For Mac

Updates

Use Kext Wizard to install patched FakeSMC.kext and AppleHDA.kext. Repair your disk permissions and rebuild the kexts caches. Reboot and enjoy. If you have any further question, feel free to leave comments. And I will approve your comments as quickly as possible. CX20585 OS X El Capitan Patched AppleHDA Audio Driver. Original AppleHDA.kext from 10.12.4 Beta 5 patched using Mirone's AppleHDA Patcher app. Tested on HP 250 G5 and works perfect including auto-switch to Headphones when a 3.5mm jack is plugged in. Install HDAEnabler and CocecCommander kexts onto EFI/CLOVER/kexts/10.12 and the patched AppleHDA onto /S/L/E.


Important Note: Using APFS is REQUIRED in Mojave in order to receive system updates via the normal Software Update method. If you choose to continue using macOS Extended (Journaled) as your filesystem type, you will NOT receive System Updates via System Preferences. If you are not using APFS, you can follow the 10.14.1 installation steps below.
10.14.6

10.14.6 can be updated normally via Software Update if using an APFS volume, and will need to be patched using an installer volume created with Mojave Patcher version 1.3.2 or later after installing.


10.14.5

10.14.5 can be updated normally via Software Update if using an APFS volume, and will need to be patched using an installer volume created with Mojave Patcher version 1.3.1 or later after installing.


10.14.4

10.14.4 adds new changes that ARE NOT patchable by the post-install tool of Mojave Patcher v1.2.3 and older! Before updating to 10.14.4, you you will need to use the latest Mojave Patcher version to create a new installer volume, using the 10.14.4 installer app. Iptime n150ua drivers for mac. Then, update to 10.14.4, either by installing via Software Update, or by just using the installer volume you've created to install.


10.14.3

If you are currently running 10.14.1 or 10.14.2, you can simply use the Software Update pane of System Preferences (if using APFS) to apply the 10.14.3 update. Once the update is installed, you will most likely need to re-apply post-install patches to get the system to boot again. This process is detailed in steps 8 - 10 above. If you are currently running 10.14.0, you'll need to proceed with the 10.14.1 update method described below.


10.14.2

If you are currently running 10.14.1, you can simply use the Software Update pane of System Preferences (if using APFS) to apply the 10.14.2 update. Once the update is installed, you will most likely need to re-apply post-install patches to get the system to boot again. This process is detailed in steps 8 - 10 above. If you are currently running 10.14.0, or are using a non-AFPS volume, you'll need to proceed with the 10.14.1 update method described below.


10.14.1/macOS Extended (Journaled) volumes

The Mojave 10.14.1 update does NOT install properly on unsupported machines, and could result in an unbootable OS. If you want to install the 10.14.1 update (and are not currently running 10.14.1), perform the following steps:
• Download the latest version of Mojave Patcher
• Download the installer using the Tools menu of Mojave Patcher
• Create a patched USB installer
• Boot from that, and install 10.14.1 onto the volume containing an older release.
• Once done, apply the post-install patches, and you should now be on 10.14.1.


An open source kernel extension enabling native macOS HD audio for not officially supported codecs without any filesystem modifications.

Translate Language

  • English ( Current )

Features

  • Digital and analog audio support starting from the OS installation
  • Recovery HD/macOS Installer audio support
  • Automated codec detection
  • Unsupported audio controller enabling (internal and external)
  • Arbitrary kext patching
  • Custom platform/layout injection
  • Works with SIP / El Capitan
  • Currently compatible with 10.8-10.15

Credits

  • Apple for macOS
  • Onyx The Black Cat by fG! for the base of the kernel patcher
  • capstone by Nguyen Anh Quynh for the disassembler module
  • toleda, Mirone and certain others for audio patches and layouts
  • Pike R. Alpha for lzvn decompression and certain HDMI patches
  • 07151129 for some code parts and suggestions
  • vit9696 for writing the software and maintaining it
  • vandroiy2013 for maintaining the codec database

Installation

The minimal instruction is available on the wiki.
The prebuilt binaries are available on releases page.

Contribution

To support more audio codecs in the binary packages you are asked to submit your configurations. Please read the wiki for more details. For the contributors with programming skills the headers are filled with AppleDOC comments.

Support and discussion

InsanelyMac topic in English
AppleLife topic in Russian

Download applehda patcher for mac windows 7

Donations

Writing and supporting code is fun but it takes time. If you want to thank the author for his work consider contributing, bugreporting, or providing the support to other users.